Blackweb remote control is one of the popular Universal remote control brands. It can be used to operate a variety of electronic devices like TV, DVD player, VCR, and works fine across brands and different models. This article provides you with the Blackweb universal remote codes.
When you lose a remote it is tough to find the remote from the same brand for the exact same Tv model or any other device. In such a case, universal remotes come to the rescue. You can not only control other brands’ devices but also use them to operate multiple devices.
Blackweb universal remote is one of such famous universal remote brands, It stops you from juggling between different remotes for the TV, DVD player, Set-top box, etc. You can use it to operate up to 5 devices.
How to Program Blackweb universal remote?
There are two different methods that you can follow to program your Blackweb universal remote. You must require a Blackweb remote code for your device to program Blackweb remote using the manual method. If you don’t have the remote code for your device, then you can try the Auto-Search programming method.
Method 1: Auto-Search
Step 1: Switch on your device like a TV or DVD player that you wish to operate using the remote control.
Step 2: You will find different device buttons (TV, DVD, BBL, and OK/SLE) on your remote. Press the correct Device button that you are using for 3 seconds. The LED light on the remote will be ON. Now you can program the TV.
Step 3: Press ‘CH+’ & ‘CH-’ buttons on the remote pointing at your device. The remote will show ON/OFF signals, and now press ‘Up’ or ‘Down’ continuously till the device turns off.
Step 4: Now press the ‘Power’ button. If the device is turned on, check for other functionalities of the remote. If everything works fine, then the remote is programmed correctly.
Step 5: If the remote doesn’t work correctly, you need to repeat all the steps until it works fine. Or you need to follow the manual search method.
Step 6: At last, press the ‘Device’ button to save the code. LED of your device will blink twice to confirm the saving of code.
Method 2: Manual Search
Step 1: Turn on your device and press the respective Device button on your remote.
Step 2: Now, you have to press and hold the Blackweb universal remote’s Setup button until it shows the ‘Light Flash’ indicating learning mode.
Step 3: Enter any of the code from the list of Blackweb Universal remote codes.
Step 4: Now point the remote at your device and press and hold the Power button. Check whether your device turns off.
Step 5: You can release the Power button once the device turns off, and your device is programmed now. Remember to check if the device responds correctly to all the remote commands.
Step 6: If the device did not turn off or not responding correctly to the remote, repeat the same procedure with other codes mentioned in the list until the Blackweb Universal remote operates appropriately.
Note: The Blackweb remote code for your device is present in the remote’s user guide. If you don’t have the user manual you can find the code in the list of Blackweb remote codes below.
Blackweb Universal Remote Codes
Blackweb Universal Remote Codes for TVs
Setup Codes to Program Blackweb Remote
Program Codes for Blackweb Universal Remote
That is all about programming Blackweb universal remote codes. I hope you understood the process. Thank you for visiting our website. Keep reading our articles.